Advantages of PPR Series
- Provide consistent filtration of fluids in a wide range of applications
- Constructed from polypropylene meltblown media, these filters retain particles from 0.1 to 50 !Jm
- High surface area ensures Long service life and Low initial pressure drop
- All components are made of 100% polypropylene material for use in critical process applications
- Manufactured and assembled in cleanroom environment to minimize the possibility of contamination
- Wide range of configurations to tit most commercially available filter housings
Materials Of Construction
| Filter Media/Components | Polypropylene |
|---|---|
| Sealing | 100% Thermally Welded |
| Gasket | Silicone, Buna, Epdm, Fep/Silicone, Ptfe, Viton® |
Specifications
| Filter Grades (Nominal) | 0.1, 0.2, 0.45, 1, 2, 3, 5, 10, 20, 50, 100 ljm |
|---|---|
| FDA Listed Materials | Manufactured From Materials Which Are Compliant With Us/Fda/21cfr177 Requirements For Polymers |
| Sterilization | Multiple Autoclaving For 30 Min At 121°c Under No End Load Conditions May Be In-Line Sanitized With Hot Water At 82 °c For 1hour In-Line Steam Sterilization Is Not Recommended |
| Purity | Cartridges Are Free Of Resins, Binders And Adhesives |
| Outside Diameter | 68mm |
| Lengths | 5″, 9.75″, 10″, 19.75″, 20″, 30″ & 40″ |
| Adapters | DOE, Code 3, Code 7, Code 6, Code 8 |
Make Of Construction
| Food and Beverage | Clarification in wine, potable water, beer, soft drink, brewery, edible oils |
|---|---|
| Chemical Industry | Adhesives, solvents, surfactants, chemicals |
| Electronic Industry | Etching solution, electroplating |
| General process industry | Pre-filtration for DI and RO systems, process water |